some of my switches (3750s) are on the right time and some are not. i have them all pointed to the same DC for NTP and they all say they are syncronized. is it possiable to have the switches pole the DC for the right time and update?
i just took over the network from someone who left the company. im trying to track down(on a 6509) what devices are connectied to the other side of an etherchannel. is it possiable to view the mac addresses that are connected to the etherchannel?
have a cable i think is bad, is it possiable to switch the cable out without causing any downtime to the switch or connected devices?HQ-1st-Flr-Stack#show switch stack-ports summary Switch#/ Stack Neighbor Cable Link Link Sync # ...
i figured i needed a TFTFP server. im haveing an issue now where when i try to overwrit the current version it says the file i hace is not valid.im going from 12.2(55)se4 down to 12.2(53)se2
the issue i am having is with a stackport not an eathernet interface. i dont think you can do a show int on a stackport. the output from the "show switch stack-ports summary" is above in my original post.
i tested both switches with the following command:diagnostic start switch # test non-disruptive and they both came back with a passed result. im guessing that this test is not in depth enough to test weather the stack ports work or not. i know the ca...
