About t-randolph

t-randolph · 05-25-2021

It looks like I should be able to make this upgrade as a singe step? Just wanted to confirm and ask about things to be alert for...

t-randolph · 10-03-2007

I have a Dell PE 2650 server which has two Intel Pro/1000 NICs which are teamed, so 1 IP between the two. They plug into my 4507, where each port is in a different channel-group. Each channel-group has a second member port, which is connected to a ...

t-randolph · 10-03-2007

Here are the port configs:interface GigabitEthernet3/32 switchport access vlan 2 switchport mode access spanning-tree portfast channel-group 3 mode onendinterface GigabitEthernet3/34 switchport access vlan 2 switchport mode access spanning-tree portf...

t-randolph · 10-03-2007

Hi AnkurYes - the cables from the server (from the teamed NICs) connect to two ports on the switch, and the ports on the switch belong to different channel-groups.The configuration is working - there is traffic going in both directions through both p...

Member Since	‎10-03-2007 07:20 AM
Date Last Visited	‎05-06-2024 10:35 AM
Posts	4

User Statistics

User Activity

Upgrade path for 2960X running 15.2(4)E8 and moving to 15.2(7)E4

4507 Config - channel-groups

Re: 4507 Config - channel-groups

Re: 4507 Config - channel-groups