About dpatel

dpatel · 07-20-2005

Hello,I have Cisco PIX firewall with 6.3.3 code. Inside my network I have unix server. My vendor has PCs in two sunbets which are going access my unix server.Objective is how I can establish host-to-subnets (site to site VPN) so their PCs in two sunb...

dpatel · 11-30-2005

Can you make sure that Cisco VPN Clinet is not configure for IP Sec over TCP?

dpatel · 11-03-2005

Can you paste your configuratin which reflects to ASDM and your PC Ip address where you are trying to connect?

dpatel · 07-21-2005

Thanks, Here is my configuration for this tunnel,Can u see any thing I am missing,access-list NO-NAT permit ip 10.55.1.0 255.255.255.0 10.1.1.0 255.255.255.0access-list NO-NAT permit ip 10.55.1.0 255.255.255.0 10.1.2.0 255.255.255.0nat (inside) 0 acc...

dpatel · 07-19-2005

I was thinking about NAT time out is issue.But thant is not a case.Is anyone has Case with TAC and might have some soutions. Becase I used not only third party applications but use putty to keep going null packes all times and same issue.No luck on o...

dpatel · 07-14-2005

I have same problem. Spent weeks and no solution from Cisco also.

Member Since	‎10-15-2004 04:20 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	6

User Statistics

User Activity

Cisco PIX and Check Point Firewall VPN

Re: VPN Traffic and PORTS

Re: Problem with ASDM

Re: Cisco PIX and Check Point Firewall VPN

Re: Telnet thru pix520 to AIX host disconnects when idle

Re: Telnet thru pix520 to AIX host disconnects when idle