Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Experts:in my implementation, we need 2 WLANs be served on the same anchor controller.WLAN1: wep/40bit, integration with NAC/OOB on anchor controller for guest wlan service.and guest account controlled by NACguest server.WLAN2: wep/40bit, no lay...
Is it possible to recreate/recover "user defined group" in Campus Manager 3.3 ?Because of some mistake, our customer delete the "/user defined group" in Campus Manager - Administration - Topology Groups, so we cannot add/modify any user define groups...
Do you know if this feature is supported with AAA-override/radius return local-split acl and vlan-id/name?
Because of Flexconnect vlan based central switching does not support macfilter, I am looking for alternative approach.
in H-REAP, the H-REAP ap does not support AAA-override,in FlexConnect, the FlexConnect ap support AAA-override.you could use the RADIUS-IETF:called-station-ID and RADIUS-Cisco:av-pair to idenity which SSID/wlan you connect to.in H-REAP/FlexConncet ap...
Hi, Nicolas:just checking the attachment for the run-config on foreign/anchor controller.DMZ_run.config - anchor controllers3p1_run.config - WiSM on v6.0.182.0s3p2_run.config - WiSM on v6.0.196.4at this moment, we have disable the wlan 10 on foreign...
Finally, the workarond should solve our issues when you apply IDU 8.0 for Campus Manager 3.3,After I had applied the CM3.3 IDU 8.0, we could regenerate the topology groud as the workarond instructions....
You should implement the Incremental Device Update (IDU) 1.0 on CampusManager 3.2You would need IDU on CM for add supported devices on Topology Layout within Campus Manager.
