Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
SpoilerHello, Cisco tech.I need you advise on below:I got the following call flow: Remote PBX --> Cisco CUBE --> CUCMWhen i got incoming call from Remote PBX i see only extension number with out alerting name.Remote PBX support has no option to enab...
Good afternoon, colleagues.
We got a CUCM 10.5.2 with ~ 2000 Cisco 7965 phones on it.
Planning migration from 5Digit extension to 6Digit extension. (Example, my current 5D extension 24555 should be migrated to 6D extension 824555).
We also have 50...
Hello, colleagues.Maybe some one knows - Is it possible to open (initiate) a meet me conference using any application ? As you know CUCM has a bulid in Meet-Me feature that allow you to join the conference for appropriate count of peoples but without...
Hi, colleagues.I trying to collect info how to monitor Cisco Call Manager Services status via SNMP. It would be great feauture to poll the requests via SNMP instead of using RTMT tool mannually.As example I have found a service OIDs (see below) but n...
Hello, gents.I have a CUCM 6.1 plus gateway with 2 working E1 channel. By the request of a bussines i trying to add one more E1.At the CUCM page i already has a two VWIC2-2MFT-T1E1-E1 cards (subunits). I just go to E1 0/1/0 and adjust settings via we...
Hi, Adam.Thanks for info. I have CUCM 11.5 Unrestricted and based on security guide i have no options to enable TFTP secure for protect phone configuration xml.sgn files (no cryptography in Unrestricted releases + phones pull their configuration in ...
Hello, Jaime. Will you able advise If i want the same outputs like "run sql select name,description from device where name like ‘SEP%’" plus registration status (OR better registeredTimeStamp)? Thanks in advance.
Hello, gents.My understanding: if you got E1 curcuit avaliable within all 30 timeslots from Telco inside - you require PVDM32 for this, which cover only this (aka 1 timeslot = 1 DSP). So you defenetly need additionally PVDM32 for transcodeing, mtp ...
Good afternoon, DavidPlease kindly share your Inbound caller ID script with me if possible (nikolay.n.kozyrev@gmail.com).Thanks in advance. I hope this would help in my scenario: 2222 calling num \ 3333 called num-- CUBE --CUCM -- script vlookup 22...
