Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Team,
We are using FWSM (version 4.0.11) which is managed by Cisco Security Manager (CSM) (version 4.4).
We are planning to upgrade the FWSM to version 4.0.17. I need to know after the FWSM upgrade, do we need to delete the existing FWSM (versi...
Dear
We have ASA-5585-X-SSP40, currently the IPS is running in promiscous mode and now we want to change the mode from promiscous mode to inline mode. I want to know is there any impact on the traffic of changing the IPS mode to inline mode. Is ther...
Dear TeamI have an access switch (C2960S-48FPS-L) which is running on version (universalk9-mz.122-55.SE5).This switch was running on VTP client mode and connected to distribution switch running on VTP client mode and vtp version 3, due to power failu...
Dear TeamI have an access switch (C2960S-48FPS-L) which is running on version (universalk9-mz.122-55.SE5).This switch was running on VTP client mode and connected to distribution switch running on VTP client mode and vtp version 3, due to power failu...
Hi Dinesh,
Thanks for your prompt response.
1) You mean to say the ASA 5510/20/40 that were shipped till April 2006 were shipped without "K8" and the ASA 5510/20/40 that were shipped after April 2006 were shipped with "K8".
2 ) Are both ASAs (AS...
Dear Karsten,
Thanks for the reply.
Can you please let me know how to use event action filters to remove deny-actions.
And also can you please tell what do you mean by removing deny-actions, do you mean signatures which are configured in blocking m...
Dear Chris
Are you able to resolve the problem of traffic blocking while changing the IPS mode from promiscous to inline.
We have ASA-5585-X-SSP40, currently the IPS is running in promiscous mode and now we want to change the mode from promiscous mo...
