About william.riley

william.riley · 05-29-2014

Does anyone have a basic mqc template that prioritizes Voip,PCoip,Video, and then catch all. Received new 3850's and a 4510 which apparently uses mqc now versus our 3560's which use mls. Having issues finding anything on marking pcoip traffic spec...

william.riley · 05-05-2014

Does anyone know if the 9148 supports a read only mode zone. I'm trying to have my veeam backup server only attach to the presented datastores with read only access. Currently veeam disables windows automount automatically but I would like to go one ...

william.riley · 04-25-2014

I'm currently having an issue with loss of connectivy between the above mentioned router and switch. After a few hours the directly connected interfaces are unable to ping each other and as a side effect we lose our eigrp adjacency. Only a reload of ...

william.riley · 06-24-2009

Currently we have setup our vpn's so they can talk lan side to lan side. Att: contains relevant parts of the vpn structure which work between the offices.We now have a client we need to setup a tunnel to that will not allow private ip's . They want a...

william.riley · 07-29-2014

Did you ever get a response to this as I have a friend experiancing the same exact issue. The sfp works in another switch and router but shows down down in the 3850 but up up on the other side.

william.riley · 05-08-2014

Did you ever get an answer to this ?

william.riley · 05-07-2014

Thanks again for this information I was able to find the read only mode using the fabric manager software and editing the zone information file.

william.riley · 05-06-2014

Thanks for the answer I'm reviewing some documentation on setting this up but unfortunately the area they say to go does not appear with the read-only mode check box listed in the documentation. I guess I'll open a TAC case.

william.riley · 05-02-2014

That's strange, I have never heard of a network issue causing a virtual machine to power off. I would have them look through the logs in vcenter. I have heard of network issues causing them to become unresponsive to pings etc but not to power off . S...

Member Since	‎10-17-2007 07:41 AM
Date Last Visited	‎05-31-2018 06:26 AM
Posts	15

User Statistics

User Activity

MQC Template

9148 fabric read only mode

loss of adjacency between isr4451x and 4510r-e

Vpn help with presenting public ip to client

Did you ever get a response

Did you ever get an answer to

Thanks again for this

Thanks for the answer I'm

That's strange, I have never