Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am a new user with the Cisco 4710 appliance and am trying to load balance Microsoft ISA servers with our 4710s. They are currently deployed in routed mode with one acting as a hot standby.My issue is that the traffic doesn't seem to be getting to ...
This is going to be a little detailed, please bear with me.We are having a problem with workstation connectivity, primarily stations we are rebuilding. The rebuild process involves a PXE boot, which then pulls down a Windows Vista mini system (Micro...
We have been recommended to move our routing services from a pair of 2821 routers to a pair of 3750 switches (with IPSERVICES). I was wondering if anyone has any statistics as to the throughput of the two?I realize that there are many variables to c...
I have a Catalyst 5500 with an RSM with a specific routing need.VLAN 200 - Our ISP provider (Y.Y.Y.Y)VLAN 202 - External Network (X.X.X.X)VLAN 201 - Internal Network (10.0.0.0)VLANS 10-15 - Various other Internal Networks (192.168.X.X)Between our ext...
More information:I added a second switch level and got some different results:Switch1 - New SwitchSwitch2 - Switch workstations were originally plugged intoSwitch3 - BackboneSwitch1 <--trunk--> Switch2 <--trunk--> Switch3I expected that when I remove...
The log messages are: Jan 8 08:39:50: %SW_MATM-4-MACFLAP_NOTIF: Host 0012.3fda.5201 in vlan 18 is flapping between port Gi0/1 and port Gi0/10Gi0/10 is a trunk to a 3560G (copper)Gi0/1 is the Vista workstationNothing has err-disabled, but I cannot ge...
Spanning tree isn't spitting back at me and the workstation is quite happy to work wirelessly. The problem only occurs on the wired side.The switch has a single gig link to the core and is not multihomed.I would expect that if I had a loop (which wa...
