Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, My customer seems to have unicast flooding in a segment of his network. There are 2 x 6509 with HSRP arquitecture, 2 x 4948, 2 x local director and 2950. The issue is that unicast traffic to a port in the 4948 switch is flooding to all port in th...
Hola,tengo la version de CUCM 7.1.5, si un usuario tiene una agenda personal creada (PAB) y recibe una llamada entrante de un telefono que esta en esa agenda, es posible que aparezca el nombre y no el numero, como pasa con una llamada de una extensió...
Hi, I have this VoIP network: SIP Server -- GW -- PSTN, with E1 link to PSTN, the gw and SIP server and GW are in the same LAN.I can see the sip-ua is registered: GW#show sip-ua register statusLine peer expires(sec...
Hi,is it possible enable and use callforwadr all for more than a line (button)?, I have ucm 7.1.3I mean, I want to do the call forward all for more than a line (button) in phones that have more than a line (button).When I press the second button and ...
Hi,I have IPS network modules WS-SVC-IDSM-2 version 7.0.2(E4) and try to add to IME 7.0.3, but it shows error. "IOException when try to get certificate. Read timed out"I have connectivity OK between IPS devices and IMW server, and the certificate in ...
OK, thanksI will try it, but I will continue with the question in minnd: why the switch clear the mac entry and is not able of refresh it.And why here is involved the arp table of 6500?, the problem happen in the 4948 switch with devices in the sam...
I can not reload the gw now, I have to wait this afternoon. I'll try it.Thats the question, the call should go from E1 to voip dial-peer, but the call seems stop his travel.In the phone I test the call, it seems to be established or connected immedia...
Yes, no translation. And no vad on dialpeer voip.I dont understand why the system needs connection plar to progress the call from pstn voice-port to voip sip dialpeer.Really I must doing something wrong, but what?
OK, thanksBut can I ask you a last question?, why I need the connection plar on the voice-port setup?I can see that if I dont config that command, the incoming call doesnt progress. Must I config connection plar or translation?I call to a number that...
