Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Problem: "show conn flow-rule qos" [followed by any input] gives "Syntax Error: Illegal parameter"
Fix: first enter "system support diagnostic-cli" and then "enable", THEN you can run e.g. "show conn flow-rule qos 268444269"
I first found the qos ...
I'm able to manually download the S643 signature update, but the MARS (v6.1.4) won't download it automatically using the same credentials. Anyone else having this trouble?
The EOL/EOS document for the MARS 20 does not mention when signature updates will end. http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5739/ps6241/end_of_life_notice_c51-470242.htmlThe EOL notice for the newer devices lists the date as June 2, ...
for newer versions, see https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwe60267 .
you have to do all three steps. "sysopt sam 1001 on" override is done in FXOS mode. Commit will give an error unless you first exit a couple times to the top menu (...
10 year old thread but here goes:
The module health is part of what the ASAs use to determine overall health (and which firewall should therefore be active). The way I do this is upgrade the module in the standby firewall first and reboot it. No fa...
