About guillaumemazoyer

guillaumemazoyer · 02-10-2012

Hi,When I came back home today I saw that my SG200-08 switch did not look fine.Basically, the system LED of the switch keeps blinking and end devices connected just don't have any network.I tried to reset the switch with the "reset" button (with a pa...

guillaumemazoyer · 05-13-2013

Hi Tom,TL;DR I tried a very basic setup one client and one server both sides in static addressing but the NFS packets are still lost.I did try this setup. Static IP addresses on both sides (IPv4 and IPv6) and it still fails.The very basic setup, no r...

guillaumemazoyer · 05-12-2013

Hi Tom,I did try to reset the switch the its factory default but it does not work anyway.If it can help, in my production environment, the NFS server and the NFS clients are on the same layer 2 even in the same VLAN.

guillaumemazoyer · 04-17-2013

Hello,Backup your firmware first and then you can donwload the old firmware here.Regards,

guillaumemazoyer · 02-10-2012

Holding the reset button a little more did the trick.Thank you for quick answer.

Member Since	‎02-10-2012 08:32 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	5

User Statistics

User Activity

SG200-08 won't boot anymore

Re: SG200-08 firmware issue

Re: SG200-08 firmware issue

Re: SG200-08 firmware issue

SG200-08 won't boot anymore