Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ASA 5545x that is a production device for receiving all AnyConnect VPN traffic for our organization. We purchased and installed a Comodo certificate to create the trust level necessary for our employees to connect. I'm attempting to enable ...
I have the following devices :1 VM Host2 Layer 3 switches I would like to provide full redundancy for all vlans being used by VM Guests on the VM Host as well as the management vlan being used by the VM Host.I have created two LACP etherchannel conne...
I have a remote location that has a Linksys/Cisco RV042 router http://www.cisco.com/en/US/products/ps9925/index.html that allows PPTP connections based on username and password combinations. There are no intermediary routers between this device and t...
I found that another good attribute to use that is universal to all users is the sAMAccountType.Just map the value of whatever your flavor of LDAP maps to "user object" to "<whatever subnet mask you want to use>" in the LDAP attribute map portion of ...
Adding all information I find as this may conceivably help somone else later.ESXi does not bridge between uplinks so no BPDUs would ever cross from switch 1 -> through the host -> then to switch 2 or vice versa.Would either of the links connecting to...
I discovered the problem...I'm an idiot. I was running an unsupported version of IOS, specifically : c2600-advsecurityk9-mz.124-19b.bin.After downgrading my IOS to : c2600-j1s3-mz.123-26.bin, my VPN connected without any problem.I hope this is helpfu...