Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I tried to upgrade a Workgroup bridge 350 (WGB352C)From V8.65 to V8.89.Everythings seems to go as expected, but after the reboot, I'm unable to connect to the device.I see the LED's flashing, different than normal.It looks like the device is continou...
I.m interested in the output of the following command on a catalyst 6509 switch.Switch (enable) sh counters 6/213 linkChange = 394I want to monitor this via SNMP, does anyone know the MIB value for this?Regards, John Zw...
I've a host connected to int fa 0/24, this is a web server.This port is the span source.The SPAN destination is int fa0/9, where a IDS is connected.Sometimes when the combined traffic rx/tx to the SPAN destination, rise above 70Mbit the source SPAN p...
This bug is not the issue with this porblem.We experiencing the problems at about 70% wire rate.On port fa 0/24 ~50Mb out and ~20Mb in.On port fa 0/9 ~70Mb out to IDS.When the output buffers on port fa0/9 are increasing (which could be normal on high...
