Hello, I notice SG300 firwave version 1.4.0.88 is not available in the download section at the moment (was the recommended version and was certainly there earlier in the week). Anyone know why? Are we due a new release perhaps? Kind Regards, Andy.
Hello all,Happy New Year!I have a network of four 300 Series small business switches. All are running software version 1.3.5.58 (latest version). Three of them are connected by 2 Port LAG groups to the central switch which in turn connects to the int...
I upgraded my RV180 to 1.0.2.6 over the weekend- factory reset and then another hour or so reconfiguring.I seem to have another issue after the upgrade. The "System", "Available LAN Hosts" option hangs when I select it. It does this both from Crome a...
Greetings all,My work laptop uses a Cisco AnyConnect VPN Client (Software Version 2.5.2006). The connection protocol is DTLS.I recently upgraded to a Cisco RV180 at home at it is running the latest software version (1.0.1.9).Since the RV180 went into...
Hello,Wonder if someone might be able to help!I've got a RV180 and so far it is working very well. I have set the logging up and passing the logs to my syslog server. However I'm getting a constant stream of "Warnings" like the sample below:-Tue Jul ...
Hello, I'm seeing similar issues on the SG300 switches after the 1.4.11.02 release upgrade. In my case I have a wildcard certificate on the switches and am using HTTPS only. I can't access the web interface via the DNS name but can via the IPv4 addre...
Mike,Firmware release 1.4.1.3 is now out and I have loaded onto the switch I was seeing Internal MAC Receive Errors on and they have now cleared.Even after some soak testing and heaving loading via my AP test routines I still haven't seen any Interna...
So, I see that a new firmware release (1.4.1.3) has indeed been released on Friday.The new version has been "promoted" back to the top of the list suggesting it is the new recommended GD versions.However, at the moment there is no release notes stati...
Hello,I already had 1.4.0.88 running on my 4 switches.Getting the firmware wasn't the point of the question- it was more about why that version appears to have been "demoted" and is no longer being presented as the GD release.There are still quite a ...
Michael,The post you reference above I was originally involved in with Tom Watts.I've seen this issue on my switches since they were first installed. Once particular switch was showing high volumes (1000's) of Internal MAC Receive errors when I check...