I have an ASA 5500 running 8.2(4). There is a static route inside for the 192.168.0.0/24 network to go to 192.168.133.1, which is another router on the firewall's inside network that leads back to their office. I try pinging from a host in the 192.16...

I have a remote access VPN configured on a device here. I'm able to connect a device and it assigns me an IP address out of the pool, and injects the routes to its local network, but I'm not able to pass any traffic through the VPN and none of the IP...

I've added a new network for a customer's firewall and I'm trying to get that network across the existing VPN tunnel to their DR site. The new network is 10.133.133.0/24 and I'm trying to get it to connect to 10.1.14.0/24 on the other side of the tun...

I have an ASA 5505 that I'm trying to create a L2L tunnel with to a Sonicwall device. Phase 1 settings appear to match on both sides from the screenshots sent from the client's office and my settings here, but something is off. My settings are below ...

I have a customer that has the following networks:Office 1-------192.168.200.0/24192.168.90.0/24192.168.10.0/24Office 2--------192.168.201.0/24192.168.91.0/24192.168.11.0/24172.16.20.0/24Office 1 also has four address pools for its dial-in VPN client...