De hecho si se puede hacer con un Wireless LAN Controller por SSID pero solo si tienes un 5508 (o un modelo mas nuevo). Los 2504 no lo soportan. El se encuentra en la seccion de QoS. Ahi se puede configurar per user bandwidth and per SSID bandwidth. ...

Hello, Disabling the 802.11b rates will increase the overall performance of the network. To do this you have to disable the following rates: 1, 2, 5.5 and 11. These are on the 2.4 GHz band, so the change has to be done on radio 0. In addition, I wa...

Hello Eddy, Roaming between APs joined to different WLCs is possible and supported. There are actually some typologies based on this (salt and pepper) so, as long as your WLCs know each other via mobility and the APs know where to go in case of a fa...

To do the conversion you need an autonomous image likec1140-k9w7-tar.153-3.JBB.tarThe images for the 1040s and 1140s are all called the same and they are available for download on the Cisco page. Just look on the support tab > Download search and loo...

HelloSince you are using a 1242 AP that means that your access point have two radios but I notice you are having this message: bsnInitRcbSlot: slot 1 has NO radio Which tells me that the access point might be having a problem recognizing a radio and ...