Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm at the beginning of a new multisite implementation with two sites. There are existing SA520 firewalls at each site. I have a UC540 and a UC560 with latest software packs and CCA 3.2(2).I'd like to know if multisite is currently (April, 2013) offi...
If one has a SPA8000 configured with a UC560 as described in the document "Configuring a Cisco UC500 to Operate with a Linksys SPA8000 Analog Telephone Adapter", is it possible to pick up a parked call from an analog phone connected through the SPA80...
This is a post intended to help others who are implementing multi-site over an MPLS or pre-existing VPN connection. I am currently finishing one such implementation and found that it was necessary to gather information from several different sources ...
I recently upgraded a Windows 7 Enterprise x86 machine from IP Communicator 7.x to 8.6. The upgrade appears to have resolved some issues with our headset but has introduced a whole new problem.The phone will hang on "Registering" when starting up. ...
I do have a contract (this is a very large installation) and Richard (C268286) at Cisco literally said "good luck with that" within the first minute of our conversation and was less then helpful for the remaining minute. I'll definitely be following...
Yes David, you are right about the SPA-8000 registering as a SIP appliance.In my tests I would call one IP phone from another IP phone, park the call and note the park slot number (702), then go to my analog phone and try to pick up the call. Dialin...
Thanks for the reply David. I get a busy signal (not a fast busy) when calling the park slot from an analog phone connected to the SPA8000. I am otherwise able to use the analog phones to make and receive calls. Picking up parked calls works fine ...
That's exactly the same thing that I saw as well. Works fine with XP but Windows registry problems with Windows 7 prevent it from working correctly after the initial configuration.Here's the last I heard on SR 617691283:Please downgrade IP communica...
