Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Due to the releasenotes for softwareversion 3.5.2 of Cisco VPN Client for MS Windows, it should be possible to use the "Are You There"-feature, where the client will check if the personal firewall is enabled and if it isn't enabled or active disconne...
You should have a look at the MTU-Size. The Tunnel is established but no data can pass the tunnel. Try to use the SetMTU-Tool which come with your Client-Installation. For PPPoE connection try to set MTU-Size to 1390 Bytes. One of our Clients has had...
Thanks a lot for the answer. We got a workaround for this problem, now the VPN client recognizes the product correctly, but disconnect the session after 5 seconds due to a missing Integrity-Server. The workaround recommends to set the firewall optio...
You will have to install NetBIOS over TCP/IP to enable windows remote browsing from Winnt 4.0 servers, I think this will help to solve the first problem. The second problem is to enable split tunneling on the concentrator (configure|user management|g...
