Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi!One of my clients had new single mode fibers installed, but not only between distant buildings on his campus: all available fibers in-/outside their buildings.They want to use a pair of Nexus 3548 and about 12-18 C2960S with 10G uplinks (about 100...
Hi!I got a new task last week and can't solve the problem:There're two 3500er LAPs, which are controlled by a 2504 wireless controller. Each LAP is connected to a PoE-enable switch port (not directly to the 2504). Everything is fine: configuration vi...
Hi!There's a problem with the SFP-10G-LRM transceivers: They aren't listed neither in the Nexus 3000 series compability list nor in the transceiver list (for Nexus 3548).Informations about the SFP-10G-LRM modules a rare and only a few dealers have t...
Hi!SSID's were configured, but... shame on me: I missed the "802.11b/g/n" part of the wireless configuration page (not: Access Points > Radios > 802.11b/g/n). There you can/have to activate the wlan functionallity.Most of the time I searched the dif...
