About mvolk

mvolk · 10-06-2015

Hello together,I have an issue with the EAP-FAST Autc for the 7925G phones with an AD User over ISE 1.4 Patch3.For me it is not clear what is the reason of the problem, on ISE or on phone.We use WLC version 8.1.102.0, the last phone load 1.4.7.(3) a...

mvolk · 01-16-2015

Hello,I have try this week to Backup the ISE and Prime to a Synology NAS.Since a time i´m sure that the configuration on ISE an Prime are ok also DNS an Ping are ok.The staging url is nfs://<servername>.it.lokal:/volume1/CiscoBackup/The debug on both...

mvolk · 01-08-2015

Hello,since awhile i have the Problem with the 1st ISE node that it´s on updating.. status. (see attachment)Between the update from 1.2 to 1.3 this issue was not seen by the System check, it occurs later. Now i have try to leave and/or rejoin the nod...

mvolk · 11-02-2011

Hi @ all,have anybody an funktional configuration with HP ProCurve Switches to use the LAG (LACP) mode in conjunction with the WLC 4402 or 5508 with Software version 7.0.112.0? The HP Switches in the enviroment have the last Firmware version installe...

mvolk · 07-05-2016

Hello, so we have checked the reverse DNS entrys in the DNS-Servers and add the missed one. But also between a service restart and an reboot of the 2nd node only the Indexing Service still not running. The messages in the cli was the same as discribe...

mvolk · 06-15-2016

Hello, I´m on my 2nd migration to ISE 2.1 and I have the problem that here the "ISE Indexing Engine" State is "not running". Any idea why the prozess is not running!? Thanks and Regards Marc

mvolk · 04-15-2015

Hi G,so long time ago, but now I had implemeted the solution for the alcatel phones and it works good.I would be say now thans for your help!regardsMarc

mvolk · 04-15-2015

Hi Drew,long time ago I have post my problem, so we have now fixed it with with TAC but we have some other issues by replacing the EAP certificates fixed also.So, we hit some BUGs that are also present in ISE 1.3 Patch 2 and would be fixed next ISE v...

mvolk · 02-09-2015

HI G,thanks for your response. Now I have received the wired phone certificate.Which configuration on ISE I must exclict make to auth the phone now via the one way TLS?Kind regardsMarc

Member Since	‎05-05-2008 04:25 AM
Date Last Visited	‎10-22-2024 07:29 AM
Posts	19
Total Helpful Votes Received	5

User Statistics

User Activity

7925G EAP-FAST AD User an anonymous User issue on ISE

ISE 1.3 or Prime 2.1 NFS Backup to Synology NAS

ISE 1.3 Node AD Status updating issue

WLC 4402 and 5508 with LAG enabled configure for use with HP ProCurve

Hello,

Hello,

Hi G,so long time ago, but

Hi Drew,long time ago I have

HI G,thanks for your response