Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All ,
We have Cisco ISE and We have switches which are configured as dot.1x as below.
Denizli_SW1#show running-config interface fastEthernet 0/6
Building configuration...
Current configuration : 619 bytes
!
interface FastEthernet0/6
switchpo...
hi,after ı power off and power on my asr 1002 there is n error in console screen ,%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash contained errors which were auto-corrected.asr doesnt work and it emergeny !! please help
Hello ,I am configuring voice vlan but there is problem here my configtest#conf tEnter configuration commands, one per line. End with CNTL/Z.test(config)#interface gigabitEthernet 1/0/7 test(config-if)#authentication host-mode single-host (even...
Hello ,I am configuring voice vlan but there is problem here my configtest#conf tEnter configuration commands, one per line. End with CNTL/Z.test(config)#interface gigabitEthernet 1/0/7 test(config-if)#authentication host-mode single-host (eve...
Hello,I have been configuring 802.1x with Cisco secure ACS 5.3ı configured 802.1x for ethernet and it works. there is no problem (ACS asiggn vlan to interfacedepending on whether username and password on client)The next step wireless but ı have a f...
Hi Marce,
Thanks for reply ,
What do you mean with "What if the intermediate device could fiddle with the dot1x sequences (e.g.) ? "
Kindly Regards ,
Numan
Dear David, Sorry for late respond,The Issue is solved. I was triying to build port-channel on cards WS-X6748-GE-TX with Sub-Module WS-F6700-CFC and WS-X6748-GE-TX with sup module WS-F6700-DFC3C . These two sup modules have different qos capabiliti...
Hi David, when ı type "no mls qos channel-consistency" under port-channelthe issue was solved. But ı am not comfortable with that, Because ı want to use Qos feature here the "show module all" GedizCore#show module switch all Switch Number: 1 R...
