Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear colleagues,I am currently testing a Cisco 3650 for various catalogue items. One key feature that we use on almost all our catalogue items, is Quality of Service (QoS).On the old Cisco 3560 and 3750, we use "mls qos" and related commands. We use ...
Dear colleagues,I have connected a Cisco ASR1001-X 10G port to a 10G port on the Cisco 7606-S. The SFP on my ASR1001-X is SFP-10G-SR and the SFP on the 7606-S is XENPAK-10GB-LX4. I am using an MMF fibre patching. I am unable to bring the port up. I ...
We use Cisco ASR1000 routers in various places in our network, i.e. LNS, Ethernet aggregators, CPEs, etc. Today, I wanted to check/view license information on the ASR1002-F router but could not find the command "show license" anywhere. I just wanted ...
Hi Folks,I am new to VRF Lite but have recently implemented multiple VRFs on a single CPE (Customer Premises Equipment) router. I have also implemented a two-CPE redundancy using Cisco HSRP protocol but with a single VRF. Now, I would like to expand ...
Further update on this problem ...After afer furhter investigation, the conclusion is that the licensing only applies to the ASR1001 and the ASR1002X after IOS XE version 3.6s. This explains why the command "show license" doesn’t appear on the 1002-F...
Hi Rolf,Just to sum up this query ...The Multiple HSRP (M-HSRP) can be used in a multi-VRF environment to achieve redundancy on the CPE side. I have tested this with different LAN subnets and the same LAN subnets with the help of VRF. This works fine...
Hi Rolf,I have built a GNS3 model based on different LAN subnet per VRF and having an HSRP group per VRF. This appears to be working correctly, at least from HSRP point of view. I am going to modify the GNS3 model to use same LAN subnet to see if an...
Hi Rolf,This does help. Thanks for the sample config that I am going to try on GNS3.I guess the concept is not to use the same HSRP group. I also see that you have used different LAN subnet which is what needs to be done traditionally. As you know, i...
