Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We currently have an ASA with 7.2 code. We would like to turn of the inspect for sunrpc. I found that we have an access-list configured in the ASA that permits sunrpc traffic that does have hit counts associated with the traffic. We do not have th...
We have been trying to implement an MQC policy to throttle FTP traffic on ATM PVC's. Our basic requirement has been to allow Interactive traffic (HTTP, telnet, etc) to be able to burst to line rate. We would like to limit FTP traffic to approx. 30%...
We are utilizing user tracking to monitor/manager switch port usage on our Cisco switches. In one part of our network we have a pair of Cat 6513's that have a few hundred servers attached to them. Firewalls sit in front of the 6513's, so the defaul...
In a WAE 512 running ACNS 5.5.9.9, the tacacs key is not encrypted in the startup configuration. However, when I view the running configuration, the tacacs key is encrypted via astericks. Is there a way to enable the encryption of the key for the s...
I am in the process of installing LMS 3.1 and testing out functionality. After importing devices from LMS 2.6 to LMS 3.1, I ran config archive job and job never completes. I found several threads that state it may be related to CSCsx69504 and CSCsv...
After working with TAC on this issue, I found that the problem with user tracking not showing information for this switch was because our community string included an @ sign. When the queries are done for the CAM table from Ciscoworks, the query app...
We are using version 5.1.3. When I view the device in topology services it lists it as reachable. Both devices are listed as reachable and on the map it the icons for the devices are green. When I look at the device attributes, I see all the modul...
I ran into the same problem. I worked with Cisco TAC and there is a known issue out CSCsc95037. Per the TAC engineer, the following steps should be performed to get around the issue. I used the steps and the installation worked in my situation: I...
