Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I have two Cisco 3850 switches in a stack, after a reboot of the switches two ports were showing as "is down, line protocol is down (notconnect)". A shutdown and no shutdown brought them back up again. How ever the interface was only showin...
Hi all,
I have a Cisco ASA 5512-x running 9.1(2). I have a saved running-config in a file on TFTP that I want to restore to the device. How do I do this without merging the configurations?
So if I use copy tftp startup-config or copy tftp running-c...
Hi all,I need to get up to speed on deploying and maintaining a Cisco ASA 5510 for a branch office. What are my options? I've used Trainsignal for self study before along with QA.com for instructor led courses and was happy with both. They both of...
Hi all,I'm having some trouble getting my head round the following but I think it's routing related? I have a Cisco 3750 switch with the following configured:------------------------------------------------------------ interface Vlan1 ip address 192....
Hi John,
Thanks for your reply. SW version is 03.02.03.SE and the config has spanning-tree portfast default. One of the ports in question connects to an ASA firewall in a HA failover pair, to the outside interface, the other port that has shut its...
Thanks Rishabh, didn't know about the "clear config all" command that will be useful. In the end I used ASDM to restore the config from a previously backup .cfg file.
Hi Richard,ip routing is not enabled but I have been switching it on to try and get this working. When it's not enabled I think the ip default-gateway 192.168.0.254 comes into play and when it is enabled show ip route shows the following:Gateway of ...
