Hi Joshua,The below information could be located atwww.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect31/administration/guide/ac03vpn.htmlFalse Captive Portal DetectionAnyConnect can falsely assume it is in a captive portal in the foll...
Hi Don,I see that you have mentioned other servers and pcs are able to connect successfully. So, I doubt there could be an issue on the ASA side. Could you provide the following reports from the ASA side?1) You would need to give "logging buffered de...
Hi h.dam,Here are the details that we need to troubleshoot the problem,- A simple topology, of how the devices are connected? for eg, (in) ASA (out) ==== Router ----- BT 2wire..- The configuration from the router and the ASA.- Also, the debugs from t...
Hi,Could you please provide the sh report of the ASA and ip address of the dns server that you're referring to through the tunnel? I could look at the split acl in the sh tech - vpn config and let u know if there's any config change to be made.Thanks...
Please reload the device and check.Jan 01 00:32:02 [IKEv1]: Group = 203.101.X.X, IP = 203.101.X.X, ERROR: IKE failed trying to create a session manager entryseems to be a caveat in the software version. You could try upgrading to a higher version to ...
