Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All!
Have a problem with passing of mDNS/Bonjour traffic through EoIP tunnel in WLC anchor-foreign scenario. Wired print server on anchor side, and anchor wlc have a interface in the same vlan with AirPrint server. WLC see advertisement from pri...
Hi everyone,I try to configure voice vlan dynamic assignment with multi-domainWithout "switchport voice vlan XXX" I've got AUTHMGR-5-FAILWhich additional command need to be apply for interface? In all examples I see the switchport voice vlan XXXBut t...
I try get all benefits of 802.11n with 1262N in standalone mode (12.4(25d)JA)But I see the nextSettings for int dot11radio1 is the nextspeed basic-54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.channel width 40-abovechanne...
Hi All! A few notes if you do not mind For bonjour you do not need enable multicast. Multicast and bonjour was divide in 7.4 "From 7.4 release, WLC supports bonjour gateway functionality on WLC itself for which you need not enable multicast on the ...
By the way. For notes.
You must configure static voice vlan for voice. It is describe in this document:http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Security/TrustSec_1-99/IP_Tele/IP_Telephony_DIG.html
Dynamic VLAN Assignment "In the curr...
Сolleagues, the problem with the adapter. Dlink dwa-160 rev A2 managed to get about 11MB/s AE2500 is still not working as it should be. Surprised that Linksys is such a bad product. May be possible to configure the adapter, but after all that time th...
"guard interval any" is default settingsh controllers dot11Radio 1 | i GuardGuard-Interval: AnyIn any case, I attach the full version of sh controll dot11radio1Maybe this is will help to understand what I am missing
