Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a cluster running 10.5.1.11901-1. Just tried to install a new subscriber, booting from 10.5.1.10000-9 and doing patch to 10.5.1.11901-1. Failed with patch on DVD and also via SFTP. Upgrade of original servers in cluster from 10.5.1.10000-9 to ...
I am trying to route an unsolicited SIP Notify for MWI from CUCM 7.1.5 via a Cube gateway running 15.1.4M7 to a CUCM running 10.0.1.This is not working. SIP calls to phones and Unity Connection work fine over this link.Also, I can send the MWI over e...
Brian, as I had only just upgraded, I was able to switch back to the 9.1 partition, add the new Subscriber then upgrade the extended cluster. Not ideal. My problem was the support contract had not been processed so I could not raise a TAC case at tha...
Thanks Rob, Not sure what I do with the workaround though. 2 live servers upgraded already. I assume I can't run the install on the bootable and then upgrade? I need the Subscriber installed as 10.5.1.11901-1 in order to join the cluster?Dave
David,Just wanted to say thanks for the reply. I had seen reference to the nano cube but was hoping it was also possible on the standard cube on an ISR.Dave
I had the same issue, with the same "CALL_ERROR; fail with vapp error 2".Open a web browser and look at:-http://136.173.84.240:8080/ccmivr/pages/IVRMainpage.vxmlIn the returned file you should see various URL's that refer to audio files.I found that ...
Call Manager supports MTP's in software, using the CPU of the server.However, so does an IOS router. It can either provide hardware MTP's through the DSP's or software MTP's through the IOS. This is what the document you reference is refering to.eg:-...
