Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
IntroductionBFD provides a low-overhead, short-duration method of detecting failures in the forwarding path between two adjacent routers, including the interfaces, data links, and forwarding planes. BFD is a detection protocol that you enable at the ...
IntroductionCisco customers use a variety of vendor-specific CLI scripts to manage their routers because no alternative programmatic mechanism is available. In addition, a common framework is also not there to develop CLI scripts. In response to this...
Well... genrally HSRP peers should have same config so that HSRP is transparent to other devices so your action plan is correct.You have to apply route map on both to sustain the transparency.HTHParikshit
Hi!were there any changes before the issue? is this the first time that the issue has happened on this chassis? what is the current status?The error you encountered is a "Less Common Types of System Crash"See this url :http://www.ciso.com/en/US/produ...
Configuration BPDUs -are originated by the Root Bridge and flow outward along the active paths that radiate away from the Root Bridge.Topology Change Notification BPDUs - flow upstream (toward the Root Bridge) to alert the Root Bridge that the active...
