Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,My distribution switches (6509E) recieving high amount of broadcast traffic from access switch(3750) trunks , so my distribution switches cpu utilization is going high ( 90%).I know there are many braadcast traffic from access switch server vlans ...
Hi, I configured SSL vpn in 3825 router , below is my configuration , I configured multiple group policy , but when I am connecting with cisco anyconnect clinet application I cant see group option , only showing username and password option ( see at...
Hi,I have two layer of firewall , front end is checkpoint and back end is cisco fwsm , when i do nmap port sacn from external network to inside any host I can see port 1720 is as always open , but there is no service running in server with port 1720,...
I am unable to ping the interface IP from any other vlan interfaces attached to FWSM.for eg: fwsm vlan 10 nameif DMZ1 ip 10.20.20.1/24 I have host in vlan 10 , that ip is 10.20.20.100 ...
Hello Friends,I have created vpn in our Internet router so that remote users can connect vpn with cisco vpn client , now I created local user name and password for the vpn authentication , We have RSA server in our network , I just need to know wheth...
Yes , this is solved , cisco also recommending , do not configure hold timer below 4 seconds.http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094afd.shtml#topic14once again , thanks all for help.