Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In our computer room we have an ASA 5520 firewall. At some point we have decided to change this firewalll with new ASA 5515-X and we copyed the exact configuration of the old asa 5520 to 5515-X. A problem was occured after the migration between ...
Hello,Recently we bought a new firewall ASA 5515-X to replace my 5520 ASA. I used the exact commands of 5520 to configure the new firewall access rules of 5515-X FW. When I did the migration and used the new firewall all webservers worked except an ...
Recently I have installed a cme and in addition I integrated a cue to it. The problem is that when I call to the central AutoAttendant number (10 digits number) the call redirection to external numbers fails (I use customised script with with "c...
Hi Raj,I had a configuration about the tcp embryonic connctions but the number of resetting the tcp connection was not 10 ...I will check it out....You are right it is general a problem that has to be solved.How can I check if the server connection i...
I did not find any IPS "events" (logs) regarding the application server...The application server uses the TCP Port 80... Now that I remeber I used debug http at my 5515-x firewall for logs....I sent you attached the http debugging result.The hostnam...
Dear Raj,At the beginning I had enabled the https inspection and IPS.. Later, I by trying to isolate the problem I removed from the service policy (of interfaces) the some commands in order to stop the forwarding of traffic to Ithe PS inpection engi...
OK I thik I have at least one error at my configuration...I post the configuration of my current firewall:(outside1) to (lan_Servers) source static syzefxis_ranges syzefxis_ranges destination static CultMAIL CultMAIL translate_hits = 27799, untr...
Hello, I do not see any difference between sh nat detail output and my configuration commands:Manual NAT Policies (Section 1)//exempt wan traffic from translasion, because branches use headquarter dns server to resolve addresses.1 (outside1) to (lan_...
