Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys: I have a Cisco Ironport Cluster with C370 & C670 devices, I have seen many Potential Directory Harvest Attack detected 3 days ago and some guys got affected during that event. We finally found out the MTA Client involved in this situation an...
Hello Guys, I have some AirTight APs, SS-300AT-C-60, which are working standalone as WIPS. Those devices can work as AP too butI was wondering if a Cisco WLC can support it. I mean, is there any way to manage these AirTight devices via CAPWAP using a...
Hi guys:I have a 5508-WLC appliance and configured multiple ap-manager interfaces to balance the join request from LAPs and the load.I went to console port from some LAPs and saw that there was that balance among multiple ap manager interfaces (Dynam...
Hi Guys:Is there any other way to configure the checks using the hash value of an application instead of register key ??? I have read and confirmed that the hash value does not change never. Its the same value....But I did not find a way to configur...
Hi Guys, I have a NAC solution with appliance (both) CAM and CAS 4.1.8 version. I´ve already configured the AD SSO parameters and checked the AD SSO Services which is running with no issue, and it seems to be working all right but when I try to log a...
That is correct Scott, but how can I see which ap-manager interface is used by an especific lap from a pool of 6 ap-manager interfaces from the WLC prespective ?? is there any way to validate that from the WLC ??? The idea isto validate that balanc...
Hello Sanjeev and Andrew:I had the same issue with a CNA card and Cisco Nexus 4001i and I followed everything that you posted on the discussion board. The last thing mentioned by Sanjeev worked out perfectly.I re-applied the setup scrip and explicitl...
