Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I had a question about the limitations of an ASA 5505 and using it as CA. The setup would be as follows:2 ASA 5520's in set up for high availability failover.1 ASA set up with a local CA server.If I had to set up VPN to connect to an interface on the...
Hello,Is it possible to make a bridge using a 1242 and a 1310? I have been able to get them to associate together and it appears it will function as a bridge. I have the 12(4) 253 JA IOS for both devices. I would like to use the g antenna on the 1242...
Hello,We are currently expanding our wireless deployment that consists of two Aironet 1310's bridged together. We would like to hit an area in the opposite direction that is not too far away. Would replacing the 1310 in the root point with a 1410 as ...
We have a mixed network with Catalyst 6509 and 6509e's running either catos or IOS. We are in the process of upgrading all of the 6509's with catos to 6509e with IOS.Also, we appear to be running vtp version 2 on the deivices as wel.We have been expe...
Hello,We are having an issue moving a WS-SVC-CMM Cat6k Voice Linecard from a WS-C6509 chassis to a VS-6509E-S720-10G chassis. Each time we have tested moving the voice card it starts through the boot process then powers off with the following message...
Thank you for the information. Unfortunately, we are receving this message regardless of the vlan we are trying to modify, such as vlan 125. It appears that is it attempting to add or modify a vlan in vlan.dat but thinks it is missing the parent and ...
