Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Are non Cisco IP phones able to be discovered by the User Tracking Utility in Campus Manager? My customer has just added many Nortel phones on the network and would like them to be discovered if possible. I'm not thinking that they will but curious i...
For some reason I can't use most functions in ciscoworks due to the JRM service not running. I have manually tried to get get it started and it won't start. It also says that the administrator has shut down this service. Here are a couple of screen s...
No... It is 2 are 10/100/1000 Rj-45 or 2 SFP ports. You cannot use all four simultaneously.http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/hardware/installation/guide/higover.html#wp1146721HTH,Mark
In a "classified" environment the hardware is pulverized and physically destroyed. Non classified hardware the NVRAM is wiped to remove all configrations, only allowing the OS to remain. Depending on the work center a QA or outside entity would witne...
Tobias,The reason the trunk is not coming up is becasue you have a 1G interface connecting to a 10G. Try connecting a 1G to 1G or 10G to 10G. You cannot connect these interfaces at different speeds.HTH,Mark
Yes, It is normal to have your boot string pointing to disk0. You have to remember when your supervisors boot up they have no concept of slave file locations. Your boot strings should always point to files located on the local supervisor such as boot...
