I am trying to figure out how to have an ASA 5520 send out an email notification when the CPU utilization exceeds 80%. Is there a way to do this, or would I need other utilities to provide this informaiton.Thanks, Ivan Windon - CCENT ...
I'm having an odd time with CCP. When I start it up, it only displays in the top part of IE. I tried it with Firefox as well and got the same results. There seems to be no way to expand it out so I can work with it. Has anyone seen this before? ...
I was working on setting up a PIX 515e to act as my firewall and VPN. The firewall and main routing work fine as well as I am able to VPN and get a IP. However I am unable to Remote Desktop into a PC behind the firewall.Below is my config as I have i...
Very interesting. It works now. I turned on both enable IPSec over nat-t and enable IPSec over tcp port 10000. I then set my client to use IPSec over tcp and it partially worked. It asked for the password and username in rdp but still failed. I then ...
In just over 2 minutes of connect time there is 1277 packets bypassed. When I try to rdp I get 3 packets encrypted and 12 discarded. The client ip is 192.168.1.100 and the server ip is the public ip which is on the outside interface. It shows 152 byt...
I tried with asdm in information logging mode and debug mode. I don't see any activity in the logs if I try and rdp. I can ping the IP address the VPN handed out on the pc with the VPN client, but not the internal ip of 192.168.0.4. Also no logging w...