Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In some situations it might be desirable to configure different polling parameters and thresholds for different devices. For example, you might want to monitor in a different way your most critical devices, like your core routers. For that purpose, c...
DFM monitors per default only IP interfaces and trunk ports. However, in some situations it would be desirable to monitor specific access ports, for example, those connected to critical end systems like mainframes, or those connected to network devic...
In some cases it might be desirable generating SNMP traps upon receival of specific syslog messages. For example, if you want to notify a fault management application of an event for which only syslog messages are generated.For example: some IOS devi...
Hey Greg,please note NPIV is NOT access gateway mode. Brocade Access gateway = Cisco NPV. On your upstream Brocade switch you just need NPIV, not NPV or Access gateway.Cheers,Jose
Hello!I think the closest to your description is Health & Utilization Monitor, a plugin for CiscoWorks LMS with which you can monitor SNMP OIDs (bandwidth, memory utilization, etc) on Cisco devices.You can find more info about it in http://www.cisco....
Hi Scott,Check the description in http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.2/user/guide/admin.html#wp1200765As summary:1. Stop services2. Run NMSROOT/bin/resetpasswd admin3. Start servicesHope this helps!Jose
Hi Sonu!The answer is unfortunately, no. The focus of CiscoWorks regarding Fault Management is to correlate events, and send consolidated alerts to "Managers of Managers" like for example Cisco Info Center.So here is what you can do:- Send the alerts...
Hello!!Well, you have different possibilities there, depending on what you mean with "new device": a new network device? Or a new end device like a PC or an IP phone?You can achieve both with LMS: Campus Manager will tell about new network devices in...
