Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I signed up to SureWest internet for 30meg up and 30meg down internet service for less than 50.00 per month. They said I could get some static IP's so I got 3 statics.My problem is - When I set the static NAT up it seems to work fine for about 4 to 8...
Use the Packet Capture wizard. After you stop your capture, there is a button to "Save Captures" that will bring up another box asking for the save type as "Text" or "PCAP". Save it as a PCAP then open it with Wireshark. If this is not what you are w...
Now, for convenience sake only, we can create an entry on R1 (using the "IP HOST" command, that says "If I refer to the host name of R3, I really mean the IP address of R3 at 23.0.0.3" Again, this is just a convenience, and not required. Lets dem...
Gateway not pingable - Sometimes the GW admin will make it so the GW will not respond to echo requests, this is a security issue. If internet people can not ping your GW then they think it is not there and it will not show on script kiddie reports an...
You actually have 2 options.1. If you have an extra HWIC slot you can purchase another VWIC3-1MFT-T1 card.2. You can purchase a 2 port VWIC3-2MFT-T1 card.You will also need a config like this: (slot/port maybe different in your setup) controller T1 ...
ACL's are in the form of : access-list [###] [permit or deny] [protocol] [Source IP Network] [Source wilcard mask] [Destination IP Network] [Destination wildcard mask] [port (optional)] When you use the keyword "host" that equals a wildcard mask 0.0...
