Dear All,Greetings.Could you please help me to propose one solution. 240Cameras with 3 Mega Pixel, 4 NVR, 10 Access Switches and 1 Core switches.Access Switch should be 24 Port PoE+ SW, and Core may be L2 or L3 Switch. Each Access Switch will have 24...
Dears,
Greetings.
Could you please anyone clarify the below query ?
How many access switches can connect to the Distribution Switch based on user count?
Ex:- I need to design the NW diagram for 1000Users. So i use 48 port switch as Cisco 2960Series ...
Dear Devils_advocate,
Thank you so much for your input.
I thought support community is providing the solution for all verticals. not especially for technical issue.
I can go with some L2 and L3 switch as per my understanding,which will work. But i ...
Dear Reza,
Greetings.
Thanks for giving your input.
As i mentioned switching capacity in first mail as Cisco3850 is 92Gbps. Could you ensure based on SW Capacity it can handle ?. If yes give me some calculation like below.
No of PortsForwarding Rate...
Dear Reza,
Thanks for giving your input.
In future, customer will plan for redundancy switch as of now only one SW. And customer is already having 4 NVR (Network Video Recorder). My concern how do i justify Cisco WS-C3850-24T will handle all the Vid...
Dear Joseph,
Greetings.
If you have any case study regarding designing the Campus Network based on user, application, data flow etc, please share with me.
I agree your point which you mentioned above like user Qty is not enough to finalize the Switch...
Dear Joseph,
Thanks for your input.
Means each switch might handle 96Mbps. So total 21 SW, like 2016Mbps.
However, video traffic can be bursty, so more link bandwidth might be required. Additionally, if the camera traffic were "live" versus "recorde...
