Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello !When you have a vlan with multicast senders, how to have a router interface on this vlan to forward the multicast trafic, and without unicast routing.Before, with IP of senders in 10.1.23/0/24 , on a (old) 6500, this config works fine:interfac...
Hello,Since a upgrade in IOS XE 3.0.9, our ASR 1002 have a problem with the DHCPDISCOVER.When i do some debugasr1002#debug ip udp port 67UDP packet debugging is onasr1002#debug ip udp port 68UDP packet debugging is onAnd i do some tests with an linu...
HelloExcuse my very bad english. I try to configure a VPN IPsec with dVTI on an ASR 1002 (ios image: asr1000rp1-adventerprisek9.02.06.02.122-33.XNF2.bin)my client is a Cisco VPN client version 5 (on Xp)my configuration:crypto isakmp policy 1 encr aes...
The ghost client connect via wired.The WLC is a Cisco 5508. The software Version is 7.2.111.3.And multicast on wired guest lan with a cisco WLC is an option for me.It will be very more simple!
Thanks for your help !I give a graph for better explain my problem.The multicast trafic can not be routed like unicast (A Wifi Lan Controller stop it).So, the "show ip route 10.1.23.0" give a route (and unicast works very well), but i cannot use it. ...
The complete reference of IOS:Cisco IOS XE Software, Version 03.10.00.S - Extended Support ReleaseCisco IOS Software, ASR1000 Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.3(3)S, RELEASE SOFTWARE (fc1)Upgrade afet an answer of CISCO support
