About Jeff Nagel

Jeff Nagel · 12-02-2015

Hi, We currently have an ASA 8.2.5 that authenticates remote access VPN users who connect using AnyConnect 3.1 via Radius which is running on Microsoft IAS. We have 6 or 7 groups in Active Directory and as long as they are in the correct group they ...

Jeff Nagel · 06-26-2012

I am wondering if anyone is aware of any known issues connecting an ASA to a Juniper switch?We have a remote site where we have an ASA 5505 installed set up running EzVPN. We do not have not have control/access to the internet connection or the inte...

Jeff Nagel · 06-29-2012

That was it! The admin at the site gave me another external IP for the outside interface of our ASA and the connection has been stable for the last day. With the new IP on our ASA I was able to ping the old IP so they obviously have something el...

Jeff Nagel · 06-27-2012

Here is the config.ASA Version 8.0(4) !hostname HC-5505enable password xxxxxxxxxxxxx encryptedpasswd xxxxxxxxxx encryptednamesname 10.7.16.0 Beaumont_Netname 10.7.16.229 Camelotname 10.7.16.46 Citrix10name 10.7.16.147 Citrix2name 10.32.2.192 ejctxweb...

Jeff Nagel · 06-26-2012

Thanks for the response.I configured the VPN as a Lan-to-Lan tunnel a couple of hours ago and I am seeing the same symptoms as I did with the EzVPN.I did verify that the http and ssh commands are on the outside interface to all management of the ASA ...

Member Since	‎06-26-2012 01:35 PM
Date Last Visited	‎08-10-2022 12:44 AM
Posts	5

User Statistics

User Activity

Remote Access Authentication with ACS

ASA 5505 to Juniper switch

ASA 5505 to Juniper switch

ASA 5505 to Juniper switch

ASA 5505 to Juniper switch