Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Imran,what you are saying is not possible.space allocated for the config is only 3 Mb and can not be increased however it is strange that the config size has gone more than 3 MBthat can happen if you do the acl optimization and then try to save th...
did you try to run the packet tracer to find out what is causing the issue.also try to capture the traffic on the ingress and egress interface to see if the issue is at the ASA or somewhere else.refer to the below link for the packet capture on ASAh...
Can you post the output of packet-tracer as the config look correct.packet-tracer input outside tcp 1.1.1.1 1234 5001 detuse the above command as it is replace the with the ip address assigned on the outside interface of the firewall.this will let...
Hi Adam,Can you remove the switch from between and see if you ar able to get the IP addressIn case that does not work.Please collect the outputs of below debugs from both the ASA and send it to me.debug dhcpd eventdebug dhcpd packetdebug dhcpc error...
