Hello, I have a problem configuring multiple VLANs on my 1801w. I don't have any issues with current config where only native VLAN configured. Need to configure 3-4 VLANs. Any help would be greatly appreciated. configuration... ... ! ip cef no ip dhcp use vrf connected ip dhcp excluded-address 192.168.1.1 192.168.1.10 ! ip dhcp pool LAN import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 ! ! ip domain name *** ip ssh time-out 90 ip ssh version 1 ! ipv6 unicast-routing ! crypto pki trustpoint  ... ! interface FastEthernet0 ip address dhcp duplex auto speed auto ! interface BRI0 no ip address encapsulation hdlc ! interface FastEthernet1 ! interface FastEthernet2 switchport mode trunk ! interface FastEthernet3 ! interface FastEthernet4 ! interface FastEthernet5 ! interface FastEthernet6 ! interface FastEthernet7 ! interface FastEthernet8 ! interface Dot11Radio0 no ip address speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio1 no ip address speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0 station-role root ! interface ATM0 no ip address no atm ilmi-keepalive pvc 0/35 pppoe-client dial-pool-number 1 ! dsl operating-mode auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly ! interface Dialer0 ip address negotiated ip mtu 1492 ip nat outside ip virtual-reassembly encapsulation ppp ip tcp adjust-mss 1452 dialer pool 1 ppp chap hostname *** ppp chap password 7 *** ppp pap sent-username *** password 7 *** ppp ipcp dns request accept ! ip route 0.0.0.0 0.0.0.0 Dialer0 ip route 10.0.0.0 255.0.0.0 192.168.1.11 ! ! no ip http server ip http authentication local no ip http secure-server no ip nat service sip udp port 5060 ip nat inside source list NAT interface Dialer0 overload ! ip access-list standard NAT permit 192.168.1.0 0.0.0.255 ! logging facility local6 logging 205.204.91.200 ! ! ... ... View more