About Michalis Milaitis

Michalis Milaitis · 06-07-2013

Hi,I tried to configure a secondary ipv4 address on BVI interface from a more specific subnet of the primary's address network.interface BVI6 ipv4 address 10.112.242.2 255.255.255.0 ipv4 address 10.112.242.21 255.255.255.248 secondaryWhen I committed...

Michalis Milaitis · 04-08-2019

The default behaviour of ios xr is that you can't use next-hop self for ibgp reflected routes. If you want to change attributes for an ibgp session you should use the command "ibgp policy out enforce-modifications" in combination with a route policy....

Michalis Milaitis · 04-04-2019

Hello Steven, In the most cases you should not change the next-hop on the Route Reflector. The best practice is to change the next-hop on the route reflector client (for both ibgp and ebgp). If you use next-hop-self on the RR then all the traffic wil...

Michalis Milaitis · 03-27-2019

Hello Raimund, In ASR920 the keywork for L3 bridge domain interface is "BDI". So try this please : interface Port-channel1 no ip address no negotiation auto service instance 1 ethernet encapsulation dot1q 10 second-dot1q 8 rewrite ingress tag pop 2 s...

Michalis Milaitis · 03-22-2019

Hello rsharma, You need to define all your neighbors as "route-reflector-client" in your Route Reflector ASR. https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-2/routing/configuration/guide/b-routing-cg-asr9000-62x/b-routing-cg-...

Michalis Milaitis · 03-19-2019

Hello, If I understand correctly you need to much the source port with your access-list. Please change the access-list configuration like this : ipv4 access-list Limita_TP153_ACL10 permit tcp any eq 2383 any 20 permit tcp any eq 8080 any 30 per...

Member Since	‎01-02-2011 04:25 AM
Date Last Visited	‎04-10-2019 03:51 AM
Posts	22
Total Helpful Votes Received	50

User Statistics

User Activity

Secondary address from a more specific subnet

Re: IOS-XR Route Reflection with next-hop-self

Re: IOS-XR Route Reflection with next-hop-self

Re: ASR 920 Subinterface dot1.q

Re: BGP Route Reflector

Re: Juniper policy translation for CISCO XR