Hello All,I'm currently researching storm-control and wondering if there is a threshold that's generally agreed upon for use on office user ports.Thank you for your insight,Greg
Hi Michel,Sounds very similar to the issue I ran into.Are you dropping packets when you ping directly from the default gateway address of the AP or a host on the same subnet? You will have to use an extended ping command from the switch/router provi...
Hi Jean,I had this issue on some brand new 3602i+e models that were received offsite. We were getting 50% ping loss from the AP to the Controller and the AP couldn't complete a join. Once we mirrored the AP's switchport to a sniffer we found that t...
I learned a lot, thank you for this great presentation.The traffic generator and multicast receiver were difficult to find but here's a page with working links.http://pgcgi.com/hptools/(near bottom of page)
Thank you for the info Giuseppe. Question about the Gig Ether port configs. We are configuring this on user ports in an office, sometimes these ports auto negotiate to a lower speed such as 100Mbit. I'm guessing a 1% threshold value might interfer...