Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
GreetingsI have a Cisco 9300X running IOS 17.09 and I have a case where I would like to capture RSPAN traffic from another switch but also capture traffic from the local switch. The capturing device only has one monitoring interface, otherwise this w...
Hi allI need help understanding one thing regarding the SPAN feature on a Catalyst 2960X. My case is I want to capture a specific subnet on a stack of 2960Xs running L2 switching only, the subnet is tied to a specific VLAN and the capturing device is...
GreetingsI've been playing around with FDM and an FTD 7.0.1 and I'm having trouble understanding how to reach a NATed host from the inside network. It's a pretty basic setup with 192.168.1.0/24 as my inside network and 10.10.10.0/24 as an DMZ with so...
GreetingsI have a scenario where my FTDs are only reachable for management by the FMC over Internet. The FTDs are running HA so data interface access isn't an option. I assume data in transit is properly encrypted but how do I secure access to the FT...
Hi allMy first question is the most obvious one, has anyone got this integration to work?I've been fiddling with this for a day now with my on-prem Graylog servers and all I get from SecureX is "Unable to connect to Graylog, validate the configured A...
That does not workmonitor session 1 source remote vlan 999% Cannot add RSPAN VLAN as source for SPAN session 1 as it is not a RSPAN Destination session
From what I've seen this design doesn't work. The receiving device isn't seeing any traffic from the local switch.The monitor session 1 part is working. Traffic is seen from other switches but the monitor session 2 part is not working.monitor session...
HiYes I know you cannot have local SPAN and RSPAN sent to the same destination interface, trying that is also met with an error message. If you read my post you'll see that's not what I'm trying to do.My receiving device only has one "sniffer" interf...
I forgot about the config.This is the config generating alot of retransmissionsmonitor session 1 source vlan 403monitor session 1 destination interface Gi4/0/37While this one does notmonitor session 1 source interface Gi1/0/52monitor session 1 sourc...
