Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,Been tasked with investigating poor performance on one of our APs at a remote site. Reports are of clients 'dropping off the network'. Initial diagnostics shows ping times as below (local layer 3 switch svi to wireless device): monl3s01#ping ...
Hi,Apologies for my first post being a question but I've got an urgent problem to solve before Monday morning. I'll try to keep it as simple as possible without missing out any important information.We have moved our servers, routers, firewalls etc t...
Hi George,The clients are a variety of devices of different type and brands. Some are not company owned. Unfortunately I don't have access to the site nor any meaningful way of doing any tests locally expect that which I can do via SSH/GUI on the WLC...
Hello Rasika,Thanks for the reply, AP is AIR-LAP1142N-E-K9, Primary Software Version 7.6.120.0 Boot Version 12.4.18.0 IOS Version 15.2(4)JB5$ The AP with the problem is MONAP01The Client in the 'show client detail' output has the following respons...
Hi Paul,Sorry for not getting back to you sooner. Ended up getting snowed under with 101 other things during the move making it impossible to relocate the Firebox back to the original site. Luckily we managed to hammer BT first thing Monday morning a...
Hi Paul,Yes, you understand the situation correctly. For me to avoid a very lengthy reconfiguration of a firewall that I've just inherited - without documentation... I need the old site BTNet IP adresses to work when configured on the Watchguard WAN ...
Hi Paul,The addresses are on a WAN port of our Watchgaurd firebox which was connected to the BTNet router. This firebox has been moved to the new site without any reconfiguration (LAN IP addresses have moved to new site also). We were expecting to be...