I have a WGB that is running PEAP and works fine, but the time doesn't save right. The bridge doesn't work after a reload due to time skew. The clock save interval 8 is setup on the bridge.AP is a 1252 running 15.2-2-JA1. See attached config.
The avdirecto http works great. The SSL termination gives tcp resets. They are both pointing the same real server. The plan is to have everything South of the ACE in clear. See attached config. I would greatly appreciate someone sanity checking the c...
I have a pair of Cisco Anyconnect phones that can't seem to route traffic over the vpn to each other. I get a NAT RPF-Drop. I had to put a manual NAT in for section 1 to prevent the source translation to outside IP. The interfaces seem to match up. T...
I have a 5540 running 8.2.5 and SSH access stopped working. Telnet still works.Logs show this:%ASA-6-302013: Built inbound TCP connection 227557909 for outside:x.x.x.x/62168 (x.x.x.x/62168) to identity:y.y.y.y/22 (y.y.y.y/22)%ASA-5-321001: Resource '...
We've also validated that the device is properly synced to a stratum 3 time source. Is there a bug that's causing this? How do I check for the presence of time on the nvram?
I actually labbed this up this morning and here's what I found.1) Running a verbatim config using 8.4(5) the nat worked properly and passed the traffic through the packet-tracer.2) Running a verbatim config using 8.3(2) (same as the troubled firewall...