I have two 3850 switches running OSPF which for the most part is working just fine, except switch B is logging the following errors:
340231: Nov 10 09:46:46: %OSPF-4-ERRRCV: Received invalid packet: mismatched area ID from backbone area from 172.16....
When viewing a video using port 554 from inside to a server in the DMZ, I get this error. If you view from the outisde, it works fine. Below is the full syslog meesage. Any suggestions?4 Sep 20 2007 15:48:24 507001 192.168.10.10 DMZ-WEB-SERVER T...
I swapped out our PIX with an ASA 5510 v8.02 and one of tunnels won't allow traffic through. The dynnamic NAT rule shows up as the culprit in packet tracer. Our traffic has to be NATed to get to their site DMZ servers. Not sure what I missed in th...
Jon,
The switches are connected via trunk with was allowing all vlans. I changed it on both side to only allow the network used for connecting the two switches and then the errors stopped.
Thanks,
Pat
That was missing. So I issued the command but it dinn't change anything. I also see the following error for traffic that should be allowed through the tunnelSep 10 2007 08:45:09 106001 192.168.72.102 Stibo_HTQuark Inbound TCP connection denied fro...