Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I ran into a similar issue with a customer, (compounded by their ASA forwarding directed broadcasts, which it shouldn't be doing). This caused a broadcast storm on the LAN, even with the WLC disconnected. The problem was the code version on the APs...
Yes. Assuming you have dual-band APs, you'll want to do this on both the 2.4 and 5 GHz radios on each AP. You may not have to lower the 5 GHz as much, because it generally does not propagate as well over distance or through obstructions as 2.4 GHz...
You can certainly manually configure the power levels on some or all APs, but I wouldn't necessarily recommend this. You can do this through a WCS template for lightweight APs (go to the radio pages - then select Power Assignment then Custom and you...
David,We had a customer experience the same thing after the bridges were temporarily disconnected and a (long!) cable run between sites as an experiment. Now they are having problems passing traffic and the radio interface shows forwarding state of...
Working: redirect to user's desired URLNot long after I posted asking about redirecting to the user's desired page, I found a workaround.I had been using the built-in default web auth files as a template and customized.There are webauth bundle exampl...
