Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have seen this issue in many versions on 9800s now. For some reason, when trying to apply Tags to APs by assigning them to a Location through the Web interface you always receive an error stating that the RF Policies should be different for the 2.4...
I am looking for the command to configure the AP Location field via the CLI on a 9800 WLC. This is different than the AP Location command used to assign Tags to APs. The AP location field is present when you enter the configuration of an individual A...
I have a (hopefully) quick question about 40Mhz wide channels with the 5GHz spectrum. If I am using 40Mhz wide channels in my wireless network and I disable channel 149, does that mean channel 153 will not be used even if it's still enabled? From w...
I was able to find a fix for at least our network. The issue was we had Option 108 enabled in the DHCP options for the DHCP scope for the wireless network. Removing Option 108 resolved the issue with Android clients not receiving DHCP.
I am seeing this issue as well on Meraki Wireless. Seems to be affecting newer Android devices only. All other clients are happy and get DHCP Address no issue. I have packet captures showing the DHCP Discover from the client then an Offer from the se...
In the release notes for 8.1 it mentions they don't recommend downgrading to a release older than 8.1 after upgrading.
In the notes, under "Supported Cisco Wireless Controller Platforms"
http://www.cisco.com/c/en/us/td/docs/wireless/controller/releas...
I'm planning on maybe testing this in the lab. I'd like to see DBS in action now. Though my lab WLC is running 8.0 and I haven't upgraded to 8.1 because I don't think there's a way to downgrade back to 8.0.
PS-
I really enjoy your website. It is ...
