Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have configured admin context on my FWSM as transparent FW with vlan 911 being the outside and vlan 11 being the inside interface...I have created both inside and outside ACLs to be permit icmp any any and ip any any but somehow hosts on the ...
Hello,I have the following situation in my customer's network: when adding the switch 6.5k with FWSM(ver 3.1) in MARS (4.2.8) discovery of FWSM results in an error with the following message:Error occured during FWSM 3.x multicontext discovery. More ...
Hello,I am rather new to VRF-lite so I need to ask the following:I need to configure vrf-lite on 2 of the core switches in one building so I can have separate routing tables. Together with that I need to implement redundancy in the network so if one ...
Hello,I have 150 WAN locations that I can only ssh to, with a ip domain name that needs to be slightly changed. WHen changing this, will I have to regenerate the RSA keys as well?
Hello,The network that I have is thishost1---/pix1/---/router/----/pix2/--/host2/I want to create VPN between to PIXes.host2 and all of the PIX2 interfaces have private IPs but for the sake of VPN and mutual communication between host1 and host2 I ne...
yes they are. when you issue show vlan on the swich you se the vlans 11 & 911they are assigned to FWSM through firewall vlan-group 1, 11,911and yes, they are created on FWSM and named as inside and outside..
Hello,I have the same problem. I have put ACL with permit icmp any any and permit ip any any on both the inside and outside, and I still cannot ping or pass through the FWSM.I have put icmp permit any outside command and icmp permit inside command as...
Hi,Unfortunately I cannot remove the config regarding the multicontext mode of FWSM.I have tried deleting the FWSM from MARS, and adding it again, but I failed, because MARS kept on giving me the message that I already have FWSM configured even thoug...
